Number of View: 3407
Carbide Inserts – Find Carbide Inserts
Gerber 48252 Carbide Cutter Insert Replacements
From the Manufacturer
Selected models of the Gerber tool line feature an extremely rugged tungsten carbide cutting insert. This 
triangular insert is particularly good for cutting wire or fishhooks, or other similar materials.
And because you’ll be inclined to use the heck out of this cutter, we figured it’d smart of offer replacements. Carbide Cutter Insert Replacements come two to a pack, and include a hex head wrench and four replacement screws for Multi-Plier® tool itself. It might be a good idea of keep a replacement pack on hand.
Because you just never know when you’re encounter a whole lotta things that just beg to be clipped with the power of tungsten carbide. These inserts cut quick and clean and mean.
The 2009 Report on Carbide Inserts for Machine Tools and Metalworking Machinery Excluding Indexible and Throwaway Types: World Market Segmentation by City (Paperback)
Product Description
In performing various economic analyses for its clients, I have been occasionally asked to investigate the market potential for various products and services across cities. The purpose of the studies is to understand the density of demand within a country and the extent to which a city might be used as a point of distribution within its region. From an economic perspective, however, a city does not represent a population within rigid geographical boundaries. To an economist or strategic planner, a city represents an area of dominant influence over markets in adjacent areas. This influence varies from one industry to another, but also from one period of time to another.
In what follows, I summarize the economic potential for the world’s major cities for “carbide inserts for machine tools and metalworking machinery excluding indexible and throwaway types” for the year 2009. The goal of this report is to report my findings on the real economic potential, or what an economist calls the latent demand, represented by a city when defined as an area of dominant influence. The reader needs to realize that latent demand may or may not represent real sales.
Excerpt. © Reprinted by permission. All rights reserved.
Market Potential Estimation Methodology
Overview
This study covers the world outlook for carbide inserts for machine tools and metalworking machinery excluding indexible and throwaway types across more than 2000 cities. For the year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the city in question (in millions of U.S. dollars), the percent share the city is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a city vis-a-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.
This study does not report actual sales data (which are simply unavailable, in a comparable or consistent manner in virtually all of the cities of the world). This study gives, however, my estimates for the worldwide latent demand, or the P.I.E. for carbide inserts for machine tools and metalworking machinery excluding indexible and throwaway types. It also shows how the P.I.E. is divided across the world’s cities. In order to make these estimates, a multi-stage methodology was employed that is often taught in courses on international strategic planning at graduate schools of business.
What is Latent Demand and the P.I.E.?
The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The “market” is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).
The latent demand for carbide inserts for machine tools and metalworking machinery excluding indexible and throwaway types is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a city market.
Another reason why sales do not equate to latent demand is exchange rates. In this report, all figures assume the long-run efficiency of currency markets. Figures, therefore, equate values based on purchasing power parities across countries. Short-run distortions in the value of the dollar, therefore, do not figure into the estimates. Purchasing power parity estimates of country income were collected from official sources, and extrapolated using standard econometric models. The report uses the dollar as the currency of comparison, but not as a measure of transaction volume. The units used in this report are: US $ mln.
For reasons discussed later, this report does not consider the notion of “unit quantities”, only total latent revenues (i.e., a calculation of price times quantity is never made, though one is implied). The units used in this report are U.S. dollars not adjusted for inflation (i.e., the figures incorporate inflationary trends) and not adjusted for future dynamics in exchange rates (i.e., the figures reflect average exchange rates over recent history). If inflation rates or exchange rates vary in a substantial way compared to recent experience, actually sales can also exceed latent demand (when expressed in U.S. dollars, not adjusted for inflation). On the other hand, latent demand can be typically higher than actual sales as there are often distribution inefficiencies that reduce actual sales below the level of latent demand.
As mentioned earlier, this study is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved. If fact, all the current products or services on the market can cease to exist in their present form (i.e., at a brand-, R&D specification, or corporate-image level) and all the players can be replaced by other firms (i.e., via exits, entries, mergers, bankruptcies, etc.), and there will still be an international latent demand for carbide inserts for machine tools and metalworking machinery excluding indexible and throwaway types at the aggregate level. Product and service offering details, and the actual identity of the players involved, while important for certain issues, are relatively unimportant for estimates of latent demand.
The Methodology
In order to estimate the latent demand for carbide inserts for machine tools and metalworking machinery excluding indexible and throwaway types on a city-by-city basis, I used a multi-stage approach. Before applying the approach, one needs a basic theory from which such estimates are created. In this case, I heavily rely on the use of certain basic economic assumptions. In particular, there is an assumption governing the shape and type of aggregate latent demand functions. Latent demand functions relate the income of a country, city, state, household, or individual to realized consumption. Latent demand (often realized as consumption when an industry is efficient), at any level of the value chain, takes place if an equilibrium in realized. For firms to serve a market, they must perceive a latent demand and be able to serve that demand at a minimal return. The single most important variable determining consumption, assuming latent demand exists, is income (or other financial resources at higher levels of the value chain). Other factors that can pivot or shape demand curves include external or exogenous shocks (i.e., business cycles), and or changes in utility for the product in question.
Ignoring, for the moment, exogenous shocks and variations in utility across countries, the aggregate relation between income and consumption has been a central theme in economics. The figure below concisely summarizes one aspect of problem. In the 1930s, John Meynard Keynes conjectured that as incomes rise, the average propensity to consume would fall. The average propensity to consume is the level of consumption divided by the level of income, or the slope of the line from the origin to the consumption function. He estimated this relationship empirically and found it to be true in the short-run (mostly based on cross-sectional data). The higher the income, the lower the average propensity to consume. This type of consumption function is labeled “A” in the figure below (note the rather flat slope of the curve). In the 1940s, another macroeconomist, Simon Kuznets, estimated long-run consumption functions which indicated that the marginal propensity to consume was rather constant (using time series data across countries). This type of consumption function is show as “B” in the figure below (note the higher slope and zero-zero intercept). The average propensity to consume is constant.
__________________________________________________________________________________________
Kennametal Indexable Inserts for Mill 1-18 ED.T1805
Grade name: KC522M Ins
ert Material: CARBIDE – PVD COATED ISO Range: M15-30 K25-35 ANSI Range: C1 Coating Description: TiAlN Grade Description: ‘Carbide substrate and TiAlN coating for general machining of high temperature alloys.’
